Posts Tagged ‘onTAP jtag’

Posted on March 9, 2021 in onTAP JTAG Blog

New technologies in aerospace are constantly being built, tested, approved and launched. For example in 2019, Virgin Orbit launched LauncherOne, outfitting a Boeing 747 to launch the 70ft long rocket from its left wing into outer space. The rocket successfully entered space and the plane returned back to solid ground to fly again another day. […]

Posted on April 29, 2020 in Boundary Scan, Boundary Scan Test

The boundary scan test software provides a way to interconnect between integrated circuits (ICs) on a board without using physical test probes. The scan contains cells within a device that can capture data from pin or core logic signals or force data onto pins. The captured data is moved out and externally compared to other […]

If a chain of devices consisted only of boundary scan (JTAG) compliant devices, there would not be too much testing required. However, boards today contain complex, non-JTAG devices that interact with the boundary scan devices. Testing just the JTAG devices on the board is always an option. However, developing a test that takes into account […]

Left Menu Icon
Flynn Systems