Flynn Systems has boundary scan experts available to answer your questions about boundary scan testing: everything from how to design for test, how to develop, run, and debug tests, and just about anything else that comes up along the way to developing a successful boundary scan solution.
Getting started with boundary scan / JTAG testing is easier than you think! Use these pages to guide you through the process. Of course, if you have any questions or need additional assistance, please do not hesitate to contact us.
Look here for tips and documentation on how to use onTAP so you get the most out of your boundary scan tests.Includes overview on design for test (DFT) tips for built-in-self-test (BIST), and a table identifying the most popular netlist readers. Please contact Flynn Systems’ technical support for more information.
The Joint Test Action Group (JTAG), an association of electronic industries involved in the design and testing of printed circuit boards after their manufacture, developed a method used to verify board designs and test printed circuit boards. The work of JTAG was later developed by the Institute of Electrical and Electronics Engineers (IEEE) into what […]
Introduction As miniaturization of PCBs became more desirable, denser (or layered) printed circuit boards began to dominate the market. Testing electrical connectivity between devices posed a huge problem because board density and complex layering prevented the IC pins from being physically probed. The Joint Test Action Group (JTAG) developed a solution: boundary scan. The Joint Test […]
Watch videos that guide you through onTAP Boundary Scan Software, teaching you how to maximize the benefits of onTAP.
Look here for commonly asked questions and frequent issues boundary scan users encounter.
Information on using onTAP and compatibility with Xilinx hardware including the USB Programming Cable and ML501 Demo board.
Follow this link to the download screen, and activate your free 30 day trial. Complete with full technical support and assistance setting up your first test.
Already an onTAP user, enter here to update to the latest build and learn more about the updates we’ve made to make onTAP better.